Where is oil drain plug on Craftsman lawn mower?
Visually Locating the Oil Plug
To locate the plug, look down at the rear left of the mower engine. The plug, or cap, to the oil fill and drain tube is located on the rear left corner on top of the engine. It can be recognized by a grip cap extending up from the engine slightly.
Furthermore, where is oil drain plug on lawn mower?
Using the Oil Drain Plug
If your engine is equipped with a drain plug, it would be located under the lawn mower deck. Look carefully as the drain plug may be obstructed by clumps of turf or debris, the belt guard or the mower blade (use caution when moving the blade).
Secondly, where is the oil drain plug on a Briggs & Stratton lawn mower engine?
Typically, however, on vertical shaft engines, the oil drain plug is located beneath the engine block near the crankshaft. To remove the square plug, all that is required is a standard size 3/8" ratchet and extension (no socket).
Is SAE 30 the same as 10W30?
Yes, you can make use 10W30 engine oil instead of the SAE30 in your Lawn Mower. ... Older engines can use the SAE30, while the 10W30 is for modern engines. Again, the SAE30 is better for warmer temperatures while the 10W30 is suitable for varying temperature ranges and also works well in cold weather.What Type of Oil do I use in my Lawn Mower? The short answer is yes, you can sometimes use the same oil that you use in your car in your lawn mower.Too much oil in your lawn mower may cause the engine to not run well and cause damaging results. Too much oil can cause your engine to overheat which can result in seal damage, blown gaskets or becoming hydrolocked.