What spark plug goes in a Briggs and Stratton 6.75 HP?
This Briggs & Stratton spark plug is good for 625e, 675ex, 725ex series, 625-675 series and Quantum 3.5-6.75 gross HP engines.
|Brand||Briggs & Stratton|
|Assembled Product Dimensions (L x W x H)||5.68 x 2.50 x 0.87 Inches|
Beside above, what kind of spark plug does a Briggs & Stratton lawn mower take?
Flathead Engine Spark Plugs & Gaps
|Replacement Part Type||Briggs & Stratton Spark Plug Part Number||Spark Plug Gap|
|Electromagnetic Suppression (EMS) (Replaces Champion QC12YC)||691043 792015||.030”|
|Extended Life Series® OHV Spark Plug Platinum (Replaces Champion RC12YC)||696202 5066 (5066D, 5066H)||.030”|
|Fits||BRIGGS & STRATTON GAS ENGINES -- All models except twin cylinder, Vanguard Intek, 19A400-19G400 series|
In respect to this, how do I know which spark plug for my lawn mower?
Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that's about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you're not sure where the spark plug is, consult your owner's manual.
Is spark plug RC12YX the same as RC12YC?
We can find no cross reference for RC12YX to any NGK number, but RC12YC does cross to NGK BCPR5ES .For most racing applications, you usually want the plug gap to be between 0.020 and 0.040 of an inch. Most engine builders seem to settle around 0.035 of an inch. Factors such as the type of ignition you run, cylinder heads, fuel and even timing can affect how much gap will work best for you.Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.Spark plugs aren't universal; you have to make sure that you buy one that fits your mower. ... If you no longer have the manual or the number has rubbed off, you can always remove the plug first and take it to AutoZone with you.To safely clean a spark plug, you should use a wire brush or spray-on plug cleaner specifically designed for this ignition part. You can also use a sturdy knife to scrape off tough deposits. Note: NEVER clean a spark plug with a shot blaster or abrasives.