homepostsWhat spark plug does a Craftsman lawn mower use?

What spark plug does a Craftsman lawn mower use?

Dennis WaldenSep 13, 2021

Replacement Plug

The Craftsman 4.5hp mower uses either a Champion model RJ19LM or J19LM spark plug, or equivalent, with the gap set at .

>> Click to read more <<

Also to know is, how do I know what spark plug I need for my lawn mower?

Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that's about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you're not sure where the spark plug is, consult your owner's manual.

Correspondingly, what spark plug do I need for my Briggs and Stratton? Flathead Engine Spark Plugs & Gaps
Replacement Part TypeBriggs & Stratton Spark Plug Part NumberSpark Plug Gap
Extended Life Series® OHV Spark Plug Platinum (Replaces Champion RC12YC)696202 5066 (5066D, 5066H).030”
Resistor Spark plug - hotter spark (Replaces Champion RC14YC)496018S 5092.030”
Resistor692051.020”

Keeping this in view, what size spark plug does a craftsman?

The Craftsman 4 piece spark plug socket set features the following sizes: 5/8, 3/4, 13/16 inch and 18mm. Each one has 6 contact points, is high quality and versatile.

Do lawn mower spark plugs come pre gapped?

Check the gap on the new spark plug before installing it. A new plug will often come pre-gapped to match your specific engine, but use a spark plug gauge to verify that it matches the manufacturer's specifications.

What happens if you put the wrong spark plug in your lawn mower?

Spark plugs that are gapped incorrectly can cause an engine to miss, or run erratically, especially during idle. The incorrect spark plug gaps can cause uneven firing of individual spark plugs and delay engine combustion; both of which can cause an engine to miss or idle erratically.

Are all spark plugs the same for lawn mowers?

Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.

Are spark plugs Universal for lawn mowers?

Spark plugs aren't universal; you have to make sure that you buy one that fits your mower. ... If you no longer have the manual or the number has rubbed off, you can always remove the plug first and take it to AutoZone with you.

What is the difference between RC12YC and rc14yc spark plug?

What is the difference between rc12yc and rc14yc spark plug? The higher number is a slightly hotter spark type plug. The RC14YC4 is now the standard plug for the 990/992 Generac engines. The 999 in the new 16-22kW Evolution (7000 series) units and older 20kW units are still using the cooler RC12YC4 plugs.

What spark plug does a 6.75 Briggs and Stratton take?

This Briggs & Stratton spark plug is good for 625e, 675ex, 725ex series, 625-675 series and Quantum 3.5-6.75 gross HP engines.
BrandBriggs & Stratton
Model799876
Assembled Product Dimensions (L x W x H)5.68 x 2.50 x 0.87 Inches

What size spark plug does a Briggs & Stratton lawn mower take?

NGK Spark Plugs for Briggs & Stratton Engines
Gap0.028" (0.7mm)
TerminalRemovable Nut
Thread Size14mm
TypeNon-Resistor, Standard
FitsBRIGGS & STRATTON GAS ENGINES -- All models except twin cylinder, Vanguard Intek, 19A400-19G400 series

Can you clean a spark plug with wd40?

WD-40 removes carbon residue and keeps moisture away from spark plugs and spark plug wires. WD stands for Water Displacement, so if your spark plugs are wet or you need to drive moisture away from ignition distributors, for example, WD-40 is a product you should have handy!
Share to: FacebookTwitterPinterestEmail

About The Author

Dennis Walden

Dennis owns a small farm and loves to grill since his early childhood. He’s a professional cook, but hiking and enjoying the great outdoors is his no less favorite part of life.