homepostsWhat size spark plug goes in a Craftsman lawn mower?

What size spark plug goes in a Craftsman lawn mower?

Dennis WaldenSep 13, 2021

Replacement Plug

The Craftsman 4.5hp mower uses either a Champion model RJ19LM or J19LM spark plug, or equivalent, with the gap set at . 030 inch.

>> Click to read more <<

One may also ask, what size are lawn mower spark plugs?

Ideally, most automobile spark plugs use a thread size of about 14mm thread why those of lawn mower range between 10 to 12 mm. Because of these differences in thread sizes, they just won't fit into the same hole or the unit in which the plug is to be fit in.

Similarly one may ask, how do I know what spark plug I need for my lawn mower? Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that's about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you're not sure where the spark plug is, consult your owner's manual.

Subsequently, what size spark plug does a Briggs and Stratton?

NGK Spark Plugs for Briggs & Stratton Engines

Gap0.028" (0.7mm)
TerminalRemovable Nut
Thread Size14mm
TypeNon-Resistor, Standard
FitsBRIGGS & STRATTON GAS ENGINES -- All models except twin cylinder, Vanguard Intek, 19A400-19G400 series

What spark plug does a craftsman LT1000 take?

Lumix GC NGK Spark Plug For John Deere LA135 Craftsman LT1000 YT4000 YTS3000 Tractors.

Do lawn mower spark plugs come pre gapped?

Check the gap on the new spark plug before installing it. A new plug will often come pre-gapped to match your specific engine, but use a spark plug gauge to verify that it matches the manufacturer's specifications.

Are all spark plugs the same for lawn mowers?

Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.

How often should you change spark plug in lawn mower?

every 25 hours

What type of spark plug does a Briggs and Stratton?

Flathead Engine Spark Plugs & Gaps
Replacement Part TypeBriggs & Stratton Spark Plug Part NumberSpark Plug Gap
Extended Life Series® OHV Spark Plug Platinum (Replaces Champion RC12YC)696202 5066 (5066D, 5066H).030”
Resistor Spark plug - hotter spark (Replaces Champion RC14YC)496018S 5092.030”
Resistor692051.020”

How long does a lawn mower spark plug last?

Typically, the consensus among the mechanical engineer community is that a spark plug for a lawn mower will last up to 25 hours of use. Some users simply prefer to replace it every mowing season as a part of their yearly lawn mower maintenance.

What is the recommended spark plug gap?

For most racing applications, you usually want the plug gap to be between 0.020 and 0.040 of an inch. Most engine builders seem to settle around 0.035 of an inch. Factors such as the type of ignition you run, cylinder heads, fuel and even timing can affect how much gap will work best for you.

What spark plug goes in a Briggs and Stratton 6.75 HP?

This Briggs & Stratton spark plug is good for 625e, 675ex, 725ex series, 625-675 series and Quantum 3.5-6.75 gross HP engines.
BrandBriggs & Stratton
Model799876
Assembled Product Dimensions (L x W x H)5.68 x 2.50 x 0.87 Inches
Share to: FacebookTwitterPinterestEmail

About The Author

Dennis Walden

Dennis owns a small farm and loves to grill since his early childhood. He’s a professional cook, but hiking and enjoying the great outdoors is his no less favorite part of life.

Related Content