Beside this, what size socket wrench Do I need to remove a spark plug from a lawn mower?
Drive socket wrench in 1/2 inches or 3/8 inches, whichever is appropriate for your machine. New spark plug.
Keeping this in consideration, is there a special wrench for spark plugs? The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. ... Use a torque wrench to make sure you don't over-tighten your plugs.
The spark plugs in both types of engine work on the same basic principle. ... Some automotive and lawn mower spark plugs may be interchangeable, but many others are not because of physical differences.
Do I Need To Use A Spark Plug Socket? ... no you don't need a spark plug socket to remove and install spark plugs. A deep socket in the correct size will work in most cases, if enough patience is used and maybe some pliers to go along with the socket.
Most spark plugs require a 5/8" (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8" spark plug socket, which will probably fit a 3/8 ratchet extension.
Ideally, most automobile spark plugs use a thread size of about 14mm thread why those of lawn mower range between 10 to 12 mm. Because of these differences in thread sizes, they just won't fit into the same hole or the unit in which the plug is to be fit in.
If you prefer to torque the spark plugs, you'll need a 3/8 inch drive torque wrench with torque range in the region of 5 plus ft.lbs. Anyway, here's a few tools to get the job done as painlessly as possible. You'll find links to the tools I use, including 3/8 inch torque wrench here on the Mechanics tools page.
Like rotating tires or changing oil, replacing spark plugs is a job that can be easily, and inexpensively, done in the confines of your own home. Although they don't need maintenance as often as the other two tasks, spark plugs are equally as important and require consistent monitoring.
To safely clean a spark plug, you should use a wire brush or spray-on plug cleaner specifically designed for this ignition part. You can also use a sturdy knife to scrape off tough deposits. Note: NEVER clean a spark plug with a shot blaster or abrasives.Share to:FacebookTwitterPinterestEmail