Ideally, most automobile spark plugs use a thread size of about 14mm thread why those of lawn mower range between 10 to 12 mm. Because of these differences in thread sizes, they just won't fit into the same hole or the unit in which the plug is to be fit in.
Also to know is, how do I know which spark plug for my lawn mower? Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that's about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you're not sure where the spark plug is, consult your owner's manual.
Also know, are all spark plugs for lawn mowers the same?
Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.
A dirty or fouled spark plug can cause your lawn mower to not start. It can also work itself loose, causing issues. If the spark plug appears to be seated correctly but the engine doesn't start, a new one may be in order.
What is the difference between rc12yc and rc14yc spark plug? The higher number is a slightly hotter spark type plug. The RC14YC4 is now the standard plug for the 990/992 Generac engines. The 999 in the new 16-22kW Evolution (7000 series) units and older 20kW units are still using the cooler RC12YC4 plugs.
For most racing applications, you usually want the plug gap to be between 0.020 and 0.040 of an inch. Most engine builders seem to settle around 0.035 of an inch. Factors such as the type of ignition you run, cylinder heads, fuel and even timing can affect how much gap will work best for you.
If the spark plug fires at the wrong time, this could lead to constant rattling, pinging or knocking sounds. Hard vehicle start. If your car is having trouble starting or just feels disjointed and jerky, your spark plugs may not be working right, and this can lead to misfires and erratic performance.
The letter “E” indicates the reach of the spark plug, that is, the length of the threads. There are two size reaches currently being used in motorcycles and ATVs. “H” indicates a 1/2″ reach, while “E” indicates a 3/4″ reach. The letter “A” indicates some type of special feature.Share to:FacebookTwitterPinterestEmail