homepostsWhat kind of spark plug does a Craftsman lawn mower take?

What kind of spark plug does a Craftsman lawn mower take?

Dennis WaldenSep 13, 2021

Replacement Plug

The Craftsman 4.5hp mower uses either a Champion model RJ19LM or J19LM spark plug, or equivalent, with the gap set at .

>> Click to read more <<

Keeping this in consideration, what spark plug do I need for my Briggs and Stratton?

Flathead Engine Spark Plugs & Gaps

Replacement Part TypeBriggs & Stratton Spark Plug Part NumberSpark Plug Gap
Extended Life Series® OHV Spark Plug Platinum (Replaces Champion RC12YC)696202 5066 (5066D, 5066H).030”
Resistor Spark plug - hotter spark (Replaces Champion RC14YC)496018S 5092.030”
Resistor692051.020”
Beside this, how do I know what spark plug I need for my lawn mower? Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that's about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you're not sure where the spark plug is, consult your owner's manual.

Herein, can you use any spark plug for lawn mower?

The spark plugs in both types of engine work on the same basic principle. ... Some automotive and lawn mower spark plugs may be interchangeable, but many others are not because of physical differences.

What spark plug does a craftsman LT1000 use?

Lumix GC NGK Spark Plug For John Deere LA135 Craftsman LT1000 YT4000 YTS3000 Tractors.

What can I use to clean my spark plugs?

To safely clean a spark plug, you should use a wire brush or spray-on plug cleaner specifically designed for this ignition part. You can also use a sturdy knife to scrape off tough deposits. Note: NEVER clean a spark plug with a shot blaster or abrasives.

What is the difference between RC12YC and rc14yc spark plug?

What is the difference between rc12yc and rc14yc spark plug? The higher number is a slightly hotter spark type plug. The RC14YC4 is now the standard plug for the 990/992 Generac engines. The 999 in the new 16-22kW Evolution (7000 series) units and older 20kW units are still using the cooler RC12YC4 plugs.

Are lawn mower spark plugs universal?

Spark plugs aren't universal; you have to make sure that you buy one that fits your mower. ... If you no longer have the manual or the number has rubbed off, you can always remove the plug first and take it to AutoZone with you.

When should I change my lawn mower spark plug?

Replace spark plugs as often as is recommended by the manufacturer.
  • Change spark plugs at the beginning of every mowing season (in the spring) and/or every 100 hours of use.
  • Use the same spark plugs recommended by the manufacturer of your lawn tractor or push mower.

Will a lawn mower start with a bad spark plug?

A dirty or fouled spark plug can cause your lawn mower to not start. It can also work itself loose, causing issues. If the spark plug appears to be seated correctly but the engine doesn't start, a new one may be in order.

What is the recommended spark plug gap?

For most racing applications, you usually want the plug gap to be between 0.020 and 0.040 of an inch. Most engine builders seem to settle around 0.035 of an inch. Factors such as the type of ignition you run, cylinder heads, fuel and even timing can affect how much gap will work best for you.
Share to: FacebookTwitterPinterestEmail

About The Author

Dennis Walden

Dennis owns a small farm and loves to grill since his early childhood. He’s a professional cook, but hiking and enjoying the great outdoors is his no less favorite part of life.

Related Content