homepostsWhat kind of spark plug does a Briggs & Stratton lawn mower take?

What kind of spark plug does a Briggs & Stratton lawn mower take?

Dennis WaldenSep 13, 2021

Flathead Engine Spark Plugs & Gaps

Replacement Part TypeBriggs & Stratton Spark Plug Part NumberSpark Plug Gap
Electromagnetic Suppression (EMS) (Replaces Champion QC12YC)691043 792015.030”
Extended Life Series® OHV Spark Plug Platinum (Replaces Champion RC12YC)696202 5066 (5066D, 5066H).030”

>> Click to read more <<

Hereof, what size spark plug does a Briggs and Stratton?

NGK Spark Plugs for Briggs & Stratton Engines

Gap0.028" (0.7mm)
TerminalRemovable Nut
Thread Size14mm
TypeNon-Resistor, Standard
FitsBRIGGS & STRATTON GAS ENGINES -- All models except twin cylinder, Vanguard Intek, 19A400-19G400 series
Correspondingly, how do I know which spark plug for my lawn mower? Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that's about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you're not sure where the spark plug is, consult your owner's manual.

In respect to this, how do I know which spark plugs I need?

The different types of spark plugs can seem overwhelming at first, but the simple way to find out what kind of spark plug you need is by checking your owner's manual. The manual will specify the right plugs for your vehicle.

How do I know if my lawn mower spark plug is bad?

Here's How to Know if a Lawn Mower Spark Plug is Bad

  1. You can't get the engine to fire up at all.
  2. You have to tug extra hard for longer than usual on the rewind.
  3. Your lawn mower loses power while moving.
  4. The gas runs out quicker than it used to.

What is the difference between RC12YC and RC14YC spark plug?

What is the difference between rc12yc and rc14yc spark plug? The higher number is a slightly hotter spark type plug. The RC14YC4 is now the standard plug for the 990/992 Generac engines. The 999 in the new 16-22kW Evolution (7000 series) units and older 20kW units are still using the cooler RC12YC4 plugs.

What is the recommended spark plug gap?

For most racing applications, you usually want the plug gap to be between 0.020 and 0.040 of an inch. Most engine builders seem to settle around 0.035 of an inch. Factors such as the type of ignition you run, cylinder heads, fuel and even timing can affect how much gap will work best for you.

What spark plug goes in a Briggs and Stratton 6.75 HP?

This Briggs & Stratton spark plug is good for 625e, 675ex, 725ex series, 625-675 series and Quantum 3.5-6.75 gross HP engines.
BrandBriggs & Stratton
Model799876
Assembled Product Dimensions (L x W x H)5.68 x 2.50 x 0.87 Inches

What size socket do I need for a spark plug?

Most spark plugs require a 5/8" (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket.

Are all spark plugs the same for lawn mowers?

Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.

Will any spark plug work in a lawn mower?

The spark plugs in both types of engine work on the same basic principle. ... Some automotive and lawn mower spark plugs may be interchangeable, but many others are not because of physical differences.

How often should a lawn mower spark plug be changed?

every 25 hours
Share to: FacebookTwitterPinterestEmail

About The Author

Dennis Walden

Dennis owns a small farm and loves to grill since his early childhood. He’s a professional cook, but hiking and enjoying the great outdoors is his no less favorite part of life.