Replacing a spark plug is one of the easiest tasks of lawnmower maintenance. ... These specialty sockets have rubber inserts to protect the spark plug's ceramic body, and they're available in a variety of sizes to fit any size spark plug (13/16 and 3/4 in.spark plugs are the most common).
Also know, are all spark plugs the same for lawn mowers? Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.
Ideally, most automobile spark plugs use a thread size of about 14mm thread why those of lawn mower range between 10 to 12 mm. Because of these differences in thread sizes, they just won't fit into the same hole or the unit in which the plug is to be fit in.
A dirty or fouled spark plug can cause your lawn mower to not start. It can also work itself loose, causing issues. If the spark plug appears to be seated correctly but the engine doesn't start, a new one may be in order.
Its center electrode should have a flat top. ... If the spark plug is in good shape but is black with carbon or wet with gasoline, then a good cleaning with a wire brush and adjusting the gap between the electrodes may be all that's needed for the spark plug to restore power to the mower.
Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.
Check the information on the old plug to determine the proper replacement. Gas-powered lawn mowers work with a spark plug that ignites the engine. Depending on your brand and model, the spark plug may be located along the back of the engine or on the front, but is easy to identify by the wire clipped onto its tip.