Beside above, where is the drain plug on a lawn mower?
If your engine is equipped with a drain plug, it would be located under the lawn mower deck. Look carefully as the drain plug may be obstructed by clumps of turf or debris, the belt guard or the mower blade (use caution when moving the blade).
Additionally, how do you change the oil on a Craftsman self propelled lawn mower?
Yes, you can make use 10W30 engine oil instead of the SAE30 in your Lawn Mower. ... Older engines can use the SAE30, while the 10W30 is for modern engines. Again, the SAE30 is better for warmer temperatures while the 10W30 is suitable for varying temperature ranges and also works well in cold weather.
When filling your lawn mower engine with oil, pour in just a little bit at a time, then re-check the level. ... Use only a type of oil suitable for your lawn mower (check the manual when in doubt). Screw the fill plug back into the crankcase. You are now ready to mower your lawn.
SAE 30- Warmer temperatures, most common oil for small engines. SAE 10W-30- Varying temperature range, this grade of oil improves cold-weather starting, but may increase oil consumption. Synthetic SAE 5W-30- Best protection at all temperatures as well as improved starting with less oil consumption.
The 19.5 hp lawn tractors take 48 U.S. fluid ounces, or 1.5 U.S. quarts, of detergent motor oil at each oil change. The oil must conform to API service classification SF, SG or SH. When operating at air temperatures above 32 degrees Fahrenheit, use SAE 30 motor oil.
The motor oil in your 6.5 horsepower Craftsman mower engine should have a viscosity rating of SAE 30 when the engine is run at temperatures above freezing (32 degrees Fahrenheit). Sears recommends use of SAE 5W-30 multi-viscosity motor oil for operation at temperatures below freezing.Share to:FacebookTwitterPinterestEmail