homepostsHow do I know which spark plug for my lawn mower?

How do I know which spark plug for my lawn mower?

Dennis WaldenSep 13, 2021

Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that's about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you're not sure where the spark plug is, consult your owner's manual.

>> Click to read more <<

Then, can you use any spark plug for lawn mower?

The spark plugs in both types of engine work on the same basic principle. ... Some automotive and lawn mower spark plugs may be interchangeable, but many others are not because of physical differences.

Also to know is, what type of spark plug does a Briggs & Stratton lawn mower use? Flathead Engine Spark Plugs & Gaps
Replacement Part TypeBriggs & Stratton Spark Plug Part NumberSpark Plug Gap
Electromagnetic Suppression (EMS) (Replaces Champion QC12YC)691043 792015.030”
Extended Life Series® OHV Spark Plug Platinum (Replaces Champion RC12YC)696202 5066 (5066D, 5066H).030”

Hereof, what happens if you use the wrong spark plug in a lawn mower?

Spark plugs that are gapped incorrectly can cause an engine to miss, or run erratically, especially during idle. The incorrect spark plug gaps can cause uneven firing of individual spark plugs and delay engine combustion; both of which can cause an engine to miss or idle erratically.

Do lawn mower spark plugs come pre gapped?

Check the gap on the new spark plug before installing it. A new plug will often come pre-gapped to match your specific engine, but use a spark plug gauge to verify that it matches the manufacturer's specifications.

How often should a lawn mower spark plug be changed?

every 25 hours

Are all spark plugs the same for push mowers?

Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.

How long does a spark plug last in a lawn mower?

Typically, the consensus among the mechanical engineer community is that a spark plug for a lawn mower will last up to 25 hours of use. Some users simply prefer to replace it every mowing season as a part of their yearly lawn mower maintenance.

What size spark plug does a Briggs & Stratton lawn mower take?

NGK Spark Plugs for Briggs & Stratton Engines
Gap0.028" (0.7mm)
TerminalRemovable Nut
Thread Size14mm
TypeNon-Resistor, Standard
FitsBRIGGS & STRATTON GAS ENGINES -- All models except twin cylinder, Vanguard Intek, 19A400-19G400 series

What spark plug does a 6.75 Briggs and Stratton take?

This Briggs & Stratton spark plug is good for 625e, 675ex, 725ex series, 625-675 series and Quantum 3.5-6.75 gross HP engines.
BrandBriggs & Stratton
Model799876
Assembled Product Dimensions (L x W x H)5.68 x 2.50 x 0.87 Inches

What is the recommended spark plug gap?

For most racing applications, you usually want the plug gap to be between 0.020 and 0.040 of an inch. Most engine builders seem to settle around 0.035 of an inch. Factors such as the type of ignition you run, cylinder heads, fuel and even timing can affect how much gap will work best for you.
Share to: FacebookTwitterPinterestEmail

About The Author

Dennis Walden

Dennis owns a small farm and loves to grill since his early childhood. He’s a professional cook, but hiking and enjoying the great outdoors is his no less favorite part of life.